Nova_Wall Care can be used to protect various types of interior vertical surfaces, provided they are clean, dry, cohesive, compact, and absorbent, such as:
- decorative finishes of mineral nature
- stone materials, limestone, marble, natural or reconstituted stones
- exposed bricks
- concrete surfaces

Type of binder: aqueous dispersion of beeswax with polymer modification.
Density: 1.01 ± 0.05 g/ml

The application of Nova_Wall Care provides good resistance to various water- and oil-soluble substances, prevents dirt buildup, and limits the formation of mold and algae.

Ready to use. On very compact surfaces, it can be diluted with up to 15% water.

Mix the product thoroughly before application.
Do not apply on fresh substrates or in the presence of rising damp. For the protection of mineral finishes (stuccos, marmorinos, etc.), wait at least 48 hours after applying the final layer.
Do not apply inside shower enclosures.
Application on concrete surfaces (CLS) serves a decorative purpose only.

(Reference environmental conditions: T = 25°C, RH = 60%)
The surface must be dry and free from dust and salt stains caused by rising damp.
Apply the first coat of Nova_Wall Care using a sponge or microfiber cloth, ensuring the pores of the substrate are saturated and the product is evenly distributed. If the product has been diluted, use a brush.
Wait for the surface to dry completely before applying a second coat.
Once the treated surface is dry to the touch, proceed with polishing.
Polishing can be done manually with a cloth or using a random orbital polisher equipped with a suitable wool pad.
For site-specific needs, additional coats of Nova_Wall Care may be applied, following the same procedure.
Drying time: approximately 30 minutes to the touch, and 4 hours for complete drying, depending on the type of substrate, its absorption, and environmental conditions.

When applying, the material must be protected from the cold and from big heat changes during the entire application process. 
Do not apply at air, background and product temperatures below +5°C or above +35 °C. 
Ambient humidity must be <75%; background humidity must be <10%.
In order not to compromise the optimal appearance and performance of the product, we recommend applying it in the above-mentioned ambient conditions.
It is advisable to complete each work with materials from the same batch of production. When using multiple batches, it is recommended to remix the various products together to avoid slight differences in shading. 
For the correct use of the above materials, and for dilution and laying, please carefully read the technical data sheet.
The correct use of equipment and personal protective equipment (PPE) is recommended during all phases of background and product preparation, and of application).

With water, immediately after use.

The coverage is strongly influenced by the type of finish or material to be coated. On smooth, moderately absorbent surfaces, 6–10 m²/L can be covered in two coats. It is advisable to verify the actual yield through a preliminary test on the specific substrate.

Colorless, not tintable.

1 L packs.

The product should preferably be used within 2 years if stored in its original, unopened containers and under suitable temperature conditions.
Storage temperature: from +5 °C to 30 °C.

It is recommended to carry out cleaning operations using a dry or water-dampened cloth made of fabric or microfiber.
The surfaces show good resistance to a wide range of substances commonly used in domestic environments.
To maintain the hydro-oleophobic properties in particularly demanding environments, it is advisable to periodically reapply additional layers of Nova_Wall Care.
It is good practice to promptly remove aggressive substances and clean with water to avoid prolonged contact with the surface.
To remove stubborn dirt, water and floor cleaner may be used.
Do not use highly alkaline or acidic descaling agents, as they may compromise the surface treated with Nova_Wall Care.